ZyXEL ES-3124PWR User Guide - Page 111

Chapter 11 Spanning Tree Protocol 11.6 Configure Multiple Rapid Spanning Tree Protocol To configure MRSTP, click MRSTP in the Advanced Application > Spanning Tree Protocol screen. See Section 11.1 on page 101 for more information on MRSTP. Figure 59 Advanced Application > Spanning Tree Protocol > MRSTP The following table describes the labels in this screen. Table 29 Advanced Application > Spanning Tree Protocol > MRSTP LABEL DESCRIPTION Status Click Status to display the MRSTP Status screen (see Figure 58 on page 110). Tree This is a read only index number of the STP trees. Active Select this to activate an STP tree. Clear this to disable an STP tree. Bridge Priority Note: You must also activate Multiple Rapid Spanning Tree in the Advanced Application > Spanning Tree Protocol > Configuration screen to enable MRSTP on the Switch. Bridge priority is used in determining the root switch, root port and designated port. The switch with the highest priority (lowest numeric value) becomes the STP root switch. If all switches have the same priority, the switch with the lowest MAC address will then become the root switch. Select a value from the drop-down list box. The lower the numeric value you assign, the higher the priority for this bridge. Bridge Priority determines the root bridge, which in turn determines Hello Time, Max Age and Forwarding Delay. ES-3124 Series User's Guide 111