ZyXEL ES-3124PWR User Guide - Page 55
Logging Out of the Web Configurator
View all ZyXEL ES-3124PWR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 4 The Web Configurator 3 When you see the message "Press any key to enter Debug Mode within 3 seconds ..." press any key to enter debug mode. 4 Type atlc after the "Enter Debug Mode" message. 5 Wait for the "Starting XMODEM upload" message before activating XMODEM upload on your terminal. 6 After a configuration file upload, type atgo to restart the Switch. Figure 23 Resetting the Switch: Via the Console Port Bootbase Version: V0.7 | 02/17/2006 11:56:33 RAM:Size = 64 Mbytes DRAM POST: Testing: 65536K OK DRAM Test SUCCESS ! FLASH: Intel 32M ZyNOS Version: V3.80(AIC.0)b0 | 01/19/2007 19:06:37 Press any key to enter debug mode within 3 seconds Enter Debug Mode ES-3124> atlc Starting XMODEM upload (CRC mode).... CCCCCCCCCCCCCCCC Total 393216 bytes received. Erasing OK ES-3124> atgo The Switch is now reinitialized with a default configuration file including the default password of "1234". 4.7 Logging Out of the Web Configurator Click Logout in a screen to exit the web configurator. You have to log in with your password again after you log out. This is recommended after you finish a management session for security reasons. Figure 24 Web Configurator: Logout Screen ES-3124 Series User's Guide 55