ZyXEL ES-3124PWR User Guide - Page 85

Figure 40 Advanced Application > VLAN > VLAN Port Setting Chapter 8 VLAN The following table describes the labels in this screen. Table 18 Advanced Application > VLAN > VLAN Port Setting LABEL DESCRIPTION GVRP GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a way for switches to register necessary VLAN members on ports across the network. Select this check box to permit VLAN groups beyond the local Switch. Port Isolation Port Isolation allows each port to communicate only with the CPU management port and the Gigabit uplink ports but not communicate with each other. This option is the most limiting but also the most secure. Port This field displays the port number. * Settings in this row apply to all ports. Use this row only if you want to make some settings the same for all ports. Use this row first to set the common settings and then make adjustments on a port-by-port basis. Ingress Check PVID GVRP Acceptable Frame Type Note: Changes in this row are copied to all the ports as soon as you make them. If this check box is selected for a port, the Switch discards incoming frames for VLANs that do not include this port in its member set. Clear this check box to disable ingress filtering. Enter a number between 1and 4094 as the port VLAN ID. Select this check box to allow GVRP on this port. Specify the type of frames allowed on a port. Choices are All, Tag Only and Untag Only. Select All from the drop-down list box to accept all untagged or tagged frames on this port. This is the default setting. Select Tag Only to accept only tagged frames on this port. All untagged frames will be dropped. Select Untag Only to accept only untagged frames on this port. All tagged frames will be dropped. ES-3124 Series User's Guide 85