ZyXEL ES-3124PWR User Guide - Page 231
You must set up a management IP address for each VLAN that you want to, con DHCP settings
View all ZyXEL ES-3124PWR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
Chapter 28 DHCP " You must set up a management IP address for each VLAN that you want to configure DHCP settings for on the Switch. See Section 7.6 on page 74 for information on how to do this. Figure 134 IP Application > DHCP > VLAN The following table describes the labels in this screen. Table 92 IP Application > DHCP > VLAN LABEL DESCRIPTION VID Enter the ID number of the VLAN to which these DHCP settings apply. Remote DHCP Enter the IP address of a DHCP server in dotted decimal notation. Server 1 .. 3 Relay Agent Information Select the Option 82 check box to have the Switch add information (slot number, port number and VLAN ID) to client DHCP requests that it relays to a DHCP server. Information This read-only field displays the system name you configure in the General Setup screen. Select the check box for the Switch to add the system name to the client DHCP requests that it relays to a DHCP server. Add Click Add to save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Cancel Click Cancel to begin configuring this screen afresh. Clear Click this to clear the fields above. VID This field displays the ID number of the VLAN group to which this DHCP settings apply. Type This field displays Relay for the DHCP mode. DHCP Status For DHCP relay configuration, this field displays the first remote DHCP server IP address. ES-3124 Series User's Guide 231