ZyXEL ES-3124PWR User Guide - Page 72
Switch Setup Screen
View all ZyXEL ES-3124PWR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Chapter 7 Basic Setting VLAN also increases network performance by limiting broadcasts to a smaller and more manageable logical broadcast domain. In traditional switched environments, all broadcast packets go to each and every individual port. With VLAN, all broadcasts are confined to a specific broadcast domain. " VLAN is unidirectional; it only governs outgoing traffic. See Chapter 8 on page 79 for information on port-based and 802.1Q tagged VLANs. 7.5 Switch Setup Screen Click Basic Setting and then Switch Setup in the navigation panel to display the screen as shown. The VLAN setup screens change depending on whether you choose 802.1Q or Port Based in the VLAN Type field in this screen. Refer to the chapter on VLAN. Figure 32 Basic Setting > Switch Setup The following table describes the labels in this screen. Table 11 Basic Setting > Switch Setup LABEL DESCRIPTION VLAN Type Choose 802.1Q or Port Based. The VLAN Setup screen changes depending on whether you choose 802.1Q VLAN type or Port Based VLAN type in this screen. See Chapter 8 on page 79 for more information. Bridge Control Protocol Transparency Select Active to allow the Switch to handle bridging control protocols (STP for example). You also need to define how to treat a BPDU in the Port Setup screen. MAC Address MAC address learning reduces outgoing traffic broadcasts. For MAC address Learning learning to occur on a port, the port must be active. 72 ES-3124 Series User's Guide