ZyXEL M-302 User Guide - Page 53
Troubleshooting, 6.2 Problem with the Link Quality
View all ZyXEL M-302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
M-302 User's Guide CHAPTER 6 Troubleshooting This chapter covers potential problems and the possible remedies. After each problem description, some instructions are provided to help you to diagnose and solve the problem. 6.1 Problems Starting the ZyXEL Utility Table 18 Troubleshooting Starting the ZyXEL Utility PROBLEM Cannot start the ZyXEL Wireless LAN utility The ZyXEL utility icon does not display. CORRECTIVE ACTION Make sure the M-302 is properly inserted and the LED is on. Use the Device Manager to check for possible hardware conflicts. Click Start, Settings, Control Panel, System, Hardware and Device Manager. Verify the status of the M-302 under Network Adapter. (Steps may vary depending on the version of Windows). Install the M-302 in another computer. If the error persists, you may have a hardware problem. In this case, you should contact your local vendor. If you install the Funk Odyssey Client software on the computer, uninstall (remove) both the Funk Odyssey Client software and ZyXEL utility, and then install the ZyXEL utility again after restarting the computer. 6.2 Problem with the Link Quality Table 19 Troubleshooting Link Quality PROBLEM CORRECTIVE ACTION The link quality and/or signal strength is poor all the time. Search and connect to another AP with a better link quality using the Site Survey screen. Move your computer closer to the AP or the peer computer(s) within the transmission range. There may be too much radio interference (for example microwave or another AP using the same channel) around your wireless network. Relocate or reduce the radio interference. Make sure there are not too many wireless stations connected to a wireless network. Chapter 6 Troubleshooting 53