ZyXEL NBG-416N User Guide - Page 126
Remote Management Limitations, 13.1.3 System Timeout, Secured Client IP Address, System
View all ZyXEL NBG-416N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Chapter 13 Remote Management 13.1.1 Remote Management Limitations Remote management over LAN or WAN will not work when: 1 You have disabled that service in one of the remote management screens. 2 The IP address in the Secured Client IP Address field does not match the client IP address. If it does not match, the NBG-416N will disconnect the session immediately. 3 There is already another remote management session with an equal or higher priority running. You may only have one remote management session running at one time. 4 There is a firewall rule that blocks it. 13.1.2 Remote Management and NAT When NAT is enabled: • Use the NBG-416N's WAN IP address when configuring from the WAN. • Use the NBG-416N's LAN IP address when configuring from the LAN. 13.1.3 System Timeout There is a default system management idle timeout of five minutes (three hundred seconds). The NBG-416N automatically logs you out if the management session remains idle for longer than this timeout period. The management session does not time out when a statistics screen is polling. You can change the timeout period in the System screen. 126 NBG-416N User's Guide