Home » ZyXEL Manuals » Bridges & Routers » ZyXEL NBG-416N » Manual Viewer

ZyXEL NBG-416N User Guide - Page 41

Table 15, Web Configurator Status Screen Router Mode - firmware

Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Chapter 4 Modes The following table describes the labels shown in the Status screen in Router mode. Table 15 Web Configurator Status Screen (Router Mode) LABEL Device Information System Name Firmware Version WAN Information - MAC Address - Connection Type - IP Address - IP Subnet Mask - Gateway - DNS LAN Information - MAC Address - IP Address - IP Subnet Mask - DHCP WLAN Information - MAC Address - Status - Name (SSID) - Channel - Operating Channel - Security Mode - 802.11 Mode - WPS DESCRIPTION This is the System Name you enter in the Maintenance > System > General screen. It is for identification purposes. This is the current firmware version of the NBG-416N. This shows the WAN Ethernet adapter MAC Address of your device. This shows the current connection type. This shows the WAN port's IP address. This shows the WAN port's subnet mask. This shows the WAN port's gateway IP address. This shows the IP address of your DNS server. This shows the LAN Ethernet adapter MAC Address of your device. This shows the LAN port's IP address. This shows the LAN port's subnet mask. This shows the LAN port's DHCP role - Server or None. This shows the wireless adapter MAC Address of your device. This shows the current status of the Wireless LAN - On, Off or Off by scheduler. This shows a descriptive name used to identify the NBG-416N in the wireless LAN. This shows the channel number which you select manually. This shows the channel number which the NBG-416N is currently using over the wireless LAN. This shows the level of wireless security the NBG-416N is using. This shows the wireless standard. This displays Configured when the WPS has been set up. This displays Unconfigured if the WPS has not been set up. System Status Operation Mode System Up Time Click the status to display Network > Wireless LAN > WPS screen. This field shows the device operation mode: Router, Access Point, Client Bridge or Universal Repeater. This is the total time the NBG-416N has been on. NBG-416N User's Guide 41

Section	Page
NBG-416N	1
Contents Overview	3
Table of Contents	5
User’s Guide	11
Introduction	13
1.1 Overview	13
1.2 Securing the NBG-416N	14
1.3 LEDs	15
1.4 The WPS Button	16
1.5 Wall Mounting	16
The Web Configurator	19
2.1 Overview	19
2.2 Accessing the Web Configurator	19
2.3 Resetting the NBG-416N	21
2.3.1 Using the RESET Button	21
Connection Wizard	23
3.1 Wizard Setup	23
3.2 Connection Wizard: STEP 1: System Information	24
3.2.1 System Name	24
3.2.2 Domain Name	25
3.3 Connection Wizard: STEP 2: Wireless LAN	26
3.3.1 WPA-PSK or WPA2-PSK Security	27
3.4 Connection Wizard: STEP 3: Internet Configuration	27
3.4.1 Ethernet Connection	28
3.4.2 PPPoE Connection	28
3.4.3 PPTP Connection	30
3.4.4 Your IP Address	31
3.4.5 WAN IP Address Assignment	32
3.4.6 IP Address and Subnet Mask	32
3.4.7 DNS Server Address Assignment	33
3.4.8 WAN IP and DNS Server Address Assignment	34
3.4.9 WAN MAC Address	35
3.5 Connection Wizard Complete	36
Modes	37
4.1 Overview	37
4.2 Setting your NBG-416N to Router Mode	39
4.2.1 Status Screen (Router Mode)	40
4.2.2 Router Mode Navigation Panel	45
4.3 Setting your NBG-416N to AP Mode	47
4.3.1 Status Screen (AP Mode)	48
4.3.2 AP Navigation Panel	50
4.4 Setting your NBG-416N to Universal Repeater Mode	52
4.4.1 Status Screen (Universal Repeater Mode)	53
4.4.2 Universal Repeater Navigation Panel	55
4.5 Setting your NBG-416N to Client Bridge Mode	56
4.5.1 Status Screen (Client Bridge Mode)	57
4.5.2 Client Bridge Navigation Panel	59
Tutorials	61
5.1 Overview	61
5.2 How to Connect to the Internet from an AP	61
5.2.1 Configure Wireless Security Using WPS on both your NBG-416N and Wireless Client	61
5.3 Enable and Configure Wireless Security without WPS on your NBG-416N	65
Technical Reference	69
Wireless LAN	71
6.1 Overview	71
6.2 What You Can Do	72
6.3 What You Should Know	73
6.3.1 Wireless Security Overview	73
6.4 General Wireless LAN Screen	75
6.4.1 No Security	77
6.4.2 WEP Encryption	78
6.4.3 WPA-PSK/WPA2-PSK	80
6.5 MAC Filter	81
6.6 Wireless LAN Advanced Screen	83
6.7 Quality of Service (QoS) Screen	85
6.8 WPS Screen	86
6.9 WPS Station Screen	87
6.10 Scheduling Screen	87
6.11 AP Select Screen	89
6.12 WLAN Info Screen	90
WAN	91
7.1 Overview	91
7.2 What You Need To Know	91
7.2.1 Configuring Your Internet Connection	92
7.3 Internet Connection	93
7.3.1 Ethernet Encapsulation	93
7.3.2 PPPoE Encapsulation	95
7.3.3 PPTP Encapsulation	97
LAN	101
8.1 Overview	101
8.2 What You Need To Know	102
8.2.1 IP Pool Setup	102
8.2.2 LAN TCP/IP	102
8.3 LAN IP Screen	103
DHCP Server	105
9.1 Overview	105
9.2 What You Can Do	105
9.3 What You Need To Know	105
9.4 General Screen	106
9.5 Advanced Screen	106
9.6 Client List Screen	108
Network Address Translation	111
10.1 Overview	111
10.2 What You Can Do	112
10.2.1 What You Need To Know	112
10.3 General NAT Screen	114
10.4 NAT Application Screen	115
10.5 Technical Reference	117
10.5.1 NAT Port Forwarding: Services and Port Numbers	117
10.5.2 NAT Port Forwarding Example	118
Dynamic DNS	119
11.1 Overview	119
11.2 Dynamic DNS Screen	119
Firewall	121
12.1 Overview	121
12.2 What You Can Do	121
12.3 What You Need To Know	122
12.3.1 About the NBG-416N Firewall	122
12.3.2 VPN Pass Through Features	122
12.4 General Firewall Screen	123
12.5 Services Screen	123
Remote Management	125
13.1 Overview	125
13.1.1 Remote Management Limitations	126
13.1.2 Remote Management and NAT	126
13.1.3 System Timeout	126
13.2 WWW Screen	127
Universal Plug-and-Play (UPnP)	129
14.1 Overview	129
14.2 What You Need to Know	129
14.3 Configuring UPnP	130
14.3.1 Using UPnP in Windows XP Example	131
14.3.2 Web Configurator Easy Access	133
System	135
15.1 Overview	135
15.2 What You Can Do	135
15.3 System General Screen	135
15.4 Time Setting Screen	137
Logs	141
16.1 Overview	141
16.2 What You Need to Know	141
16.3 View Log Screen	141
Tools	143
17.1 Overview	143
17.2 What You Can Do	143
17.3 Firmware Upload Screen	143
17.4 Configuration Screen	146
17.4.1 Backup Configuration	146
17.4.2 Restore Configuration	146
17.4.3 Back to Factory Defaults	147
17.5 Restart Screen	148
Sys OP Mode	149
18.1 Overview	149
18.2 General Screen	149
Language	153
19.1 Language Screen	153
Troubleshooting	155
20.1 Power, Hardware Connections, and LEDs	155
20.2 NBG-416N Access and Login	156
20.3 Internet Access	158
20.4 Resetting the NBG-416N to Its Factory Defaults	159
20.5 Wireless Problems	160
IP Addresses and Subnetting	161
Setting Up Your Computer’s IP Address	171
Pop-up Windows, JavaScripts and Java Permissions	199
Wireless LANs	209
Common Services	223
Legal Information	227

Match case Limit results 1 per page

Chapter 4 Modes

NBG-416N User’s Guide

The following table describes the labels shown in the

Status

screen in

Router

mode.

Table 15

Web Configurator Status Screen (Router Mode)

LABEL

DESCRIPTION

Device Information

System Name

This is the

System Name

you enter in the

Maintenance

System

General

screen. It is for identification purposes.

Firmware Version

This is the current firmware version of the NBG-416N.

WAN Information

- MAC Address

This shows the WAN Ethernet adapter MAC Address of your

device.

- Connection Type

This shows the current connection type.

- IP Address

This shows the WAN port’s IP address.

- IP Subnet Mask

This shows the WAN port’s subnet mask.

- Gateway

This shows the WAN port’s gateway IP address.

- DNS

This shows the IP address of your DNS server.

LAN Information

- MAC Address

This shows the LAN Ethernet adapter MAC Address of your

device.

- IP Address

This shows the LAN port’s IP address.

- IP Subnet Mask

This shows the LAN port’s subnet mask.

- DHCP

This shows the LAN port’s DHCP role -

Server

None

WLAN Information

- MAC Address

This shows the wireless adapter MAC Address of your device.

- Status

This shows the current status of the Wireless LAN -

Off

Off by scheduler

- Name (SSID)

This shows a descriptive name used to identify the NBG-416N

in the wireless LAN.

- Channel

This shows the channel number which you select manually.

- Operating Channel

This shows the channel number which the NBG-416N is

currently using over the wireless LAN.

- Security Mode

This shows the level of wireless security the NBG-416N is

using.

- 802.11 Mode

This shows the wireless standard.

- WPS

This displays

Configured

when the WPS has been set up.

This displays

Unconfigured

if the WPS has not been set up.

Click the status to display

Network

Wireless LAN

WPS

screen.

System Status

Operation Mode

This field shows the device operation mode:

Router

Access

Point

Client Bridge

Universal Repeater

System Up Time

This is the total time the NBG-416N has been on.