ZyXEL P-2302RL User Guide - Page 40
Wall Mounting Instructions
View all ZyXEL P-2302RL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
P-2301/2R-P1C / P-2301RL-P1C User's Guide 7 Wall Mounting Instructions Do the following to hang your ZyXEL Device on a wall. 1 Select a position free of obstructions on a sturdy wall. 2 Drill two holes for the screws. Make sure the distance between the centers of the holes, and the size of screws you use, match what is listed in section 8 on page 41. " Be careful to avoid damaging pipes or cables located inside the wall when drilling holes for the screws. 3 Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm between the heads of the screws and the wall. 4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of the ZyXEL Device with the connection cables. 40
P-2301/2R-P1C / P-2301RL-P1C User’s Guide
40
7 Wall Mounting Instructions
Do the following to hang your ZyXEL Device on a wall.
1
Select a position free of obstructions on a sturdy wall.
2
Drill two holes for the screws. Make sure the distance
between the centers of the holes, and the size of screws
you use, match what is listed in section
8
on page
41
.
Be careful to avoid damaging pipes or cables
located inside the wall when drilling holes for the
screws.
3
Do not screw the screws all the way into the wall. Leave a
small gap of about 0.5 cm between the heads of the
screws and the wall.
4
Make sure the screws are snugly fastened to the wall.
They need to hold the weight of the ZyXEL Device with the
connection cables.