ZyXEL VFG6005 User Guide - Page 28
PPPoE connected by username/password - default password
View all ZyXEL VFG6005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Static DNS 2 MTU The static DNS 2 offered by the ISP. Maximum Transmission Unit 5.1.3 PPPoE (connected by username/password) If your ISP provides the username and password, please enter the information accordingly. Provided by your ISP WAN Connection Type Authentication User Name Password PPP Connection Type Max Idle Time PPP Echo Interval PPP Retry Threshold PPP MTU MTU Select Enable/Disable to enable/disable WAN PPPoE The authentication type CHAP or PAP offered by your ISP. The user name offered by the ISP. The password offered by the ISP. Always Connected will maintain the PPPoE dial up connection. On Demand will connect only when there is traffic. PPPoE On Demand will only be activated when there is traffic. When there is no traffic within the max idle time (default: 300 seconds), the PPPoE connection will be disconnected. PPPoE echo will ensure whether the link is still up or not (default interval 20 seconds) When PPPoE echo retry exceeds PPPoE Retry Threshold (default 20 times), the dial up connection would be recognized as down. PPPoE maximum transmission unit: up to 1492 bytes (PPPoE's header is 8 bytes)(This value should be less than MTU value at least 8 bytes ). Physical Device Maximum Transmission Unit 19