ZyXEL VFG6005 User Guide - Page 92
Product Specifications - vfg6005n firmware
View all ZyXEL VFG6005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Product Specifications The following tables summarize the VFG6005 Series hardware and firmware features. Hardware Features Dimensions (W x D x H) 159 mm x 107 mm x 25 mm Weight 225 g Power Specification Input: 100~240 V AC, 50~60 Hz Output: 12 V DC 1.5 A Gigabit Ethernet ports Auto-negotiating: 100 Mbps, 1000 Mbps in either half-duplex or full-duplex mode. Auto-crossover: Use either crossover or straight-through Ethernet cables. 4 Port Gigabit Switch A combination of switch and router makes your VFG a cost-effective network solution. You can add up to four computers to the VFG without the cost of a hub when connecting to the Internet through the WAN. Add more than four computers to your LAN by using another hub or switch. LEDs PWR/SYS, WLAN (VFG6005N), WAN, LAN1-4 Reset Button The reset button is built into the rear panel. Use this button to restore the VFG to its factory default settings. Press for 1 second to restart the device. Press and hold for 7 seconds or until PWR/SYS LED is blinking to restore to factory default settings. Antenna The VFG6005N is equipped with two 2dBi (2.4GHz) detachable antennas to provide clear radio transmission and reception on the wireless network. Operation Environment Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF 83