ZyXEL VFG6005 User Guide - Page 67
Add Port Range Forwarding Rule
View all ZyXEL VFG6005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
3. Configure [Port Range Forwarding] Settings following the instructions below Port Forwarding Select Enable / Disable to enable/disable Port Forwarding 8.1.2 Add Port Range Forwarding Rule 1. Click on [Add] tab. You will see the following screen. 2. Configure [Add Port Range Forwarding Rule] Settings following the instructions below Sequence Number Rule Name Rule Enable External Interface Protocol External Port Range Internal IP Internal Port Range This defines the sequences (priorities) of the port forwarding rules. If a packet fits the conditions setup by the port forwarding rules, the packet will then be forwarded according to the 1st rule from the top of the list. Enter the name of the port forwarding rule. Check/Uncheck to enable/disable this port forwarding rule. Choose WAN1 or WAN2 as the External port forwarding interface. Choose TCP, UDP or TCP/UDP for the rule to be applied. Set up the External Port Range for the rule to be applied. Set up the Internal IP for the rule to be applied. Set up the Internal Port Range for the rule to be applied. 58