ZyXEL VMG3925-B10B User Guide - Page 116
Table 29, Label, Description
View all ZyXEL VMG3925-B10B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Chapter 8 Home Networking 3 Click Apply to save your settings. Figure 49 Network Setting > Home Networking > LAN Setup The following table describes the fields in this screen. Table 29 Network Setting > Home Networking > LAN Setup LABEL DESCRIPTION Interface Group Group Name Select the interface group name for which you want to configure LAN settings. See Chapter 14 on page 174 for how to create a new interface group. LAN IP Setup IPv4 Address Enter the LAN IPv4 IP address you want to assign to your VMG in dotted decimal notation, for example, 192.168.1.1 (factory default). Subnet Mask/ Prefix Length Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0 (factory default). Your VMG automatically computes the subnet mask based on the IP Address you enter, so do not change this field unless you are instructed to do so. IGMP Snooping Status Select the Enable IGMP Snooping checkbox to allows the VMG to passively learn multicast group. VMG3925-B10B User's Guide 116