ZyXEL VMG3925-B10B User Guide - Page 35
Push Button Configuration PBC
View all ZyXEL VMG3925-B10B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 4 Tutorials There are two WPS methods to set up the wireless client settings: • Push Button Configuration (PBC) - simply press a button. This is the easier of the two methods. • PIN Configuration - configure a Personal Identification Number (PIN) on the VMG. A wireless client must also use the same PIN in order to download the wireless network settings from the VMG. Push Button Configuration (PBC) 1 Make sure that your VMG is turned on and your notebook is within the cover range of the wireless signal. 2 Make sure that you have installed the wireless client driver and utility in your notebook. 3 In the wireless client utility, go to the WPS setting page. Enable WPS and press the WPS button (Start or WPS button). 4 Push and hold the WPS button located on the VMG's front panel for more than 5 seconds. Alternatively, you may log into VMG's web configurator and go to the Network Setting > Wireless > WPS screen. Enable the WPS function for method 1 and click Apply. Then click the Connect button. 1 3 2 Note: Your VMG has a WPS button located on its front panel as well as a WPS button in its configuration utility. Both buttons have exactly the same function: you can use one or the other. Note: It doesn't matter which button is pressed first. You must press the second button within two minutes of pressing the first one. VMG3925-B10B User's Guide 35