ZyXEL VMG3925-B10B User Guide - Page 93

Chapter 7 Wireless Figure 35 Network Setting > Wireless > WPS The following table describes the labels in this screen. Table 22 Network Setting > Wireless > WPS LABEL DESCRIPTION General WPS Select Enable to activate WPS on this VMG. Add a new device with WPS Method Method 1 Use this section to set up a WPS wireless network using Push Button Configuration (PBC). Select Enable and click Apply to activate WPS method 1 on the VMG. WPS Click this button to add another WPS-enabled wireless device (within wireless range of the VMG) to your wireless network. This button may either be a physical button on the outside of device, or a menu button similar to the WPS button on this screen. Method 2 Register Note: You must press the other wireless device's WPS button within two minutes of pressing this button. Use this section to set up a WPS wireless network by entering the PIN of the client into the VMG. Select Enable and click Apply to activate WPS method 2 on the VMG. Enter the PIN of the device that you are setting up a WPS connection with and click Register to authenticate and add the wireless device to your wireless network. You can find the PIN either on the outside of the device, or by checking the device's settings. Note: You must also activate WPS on that device within two minutes to have it present its PIN to the VMG. Method 3 Use this section to set up a WPS wireless network by entering the PIN of the VMG into the client. Select Enable and click Apply to activate WPS method 3 on the VMG. Release Configuration The default WPS status is configured. Click this button to remove all configured wireless and wireless security settings for WPS connections on the VMG. VMG3925-B10B User's Guide 93