ZyXEL VMG3925-B10B User Guide - Page 254
VMG Access and Login
View all ZyXEL VMG3925-B10B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 254 highlights
Chapter 40 Troubleshooting 5 If the problem continues, contact the vendor. 40.2 VMG Access and Login I forgot the IP address for the VMG. 1 The default LAN IP address is 192.168.1.1. 2 If you changed the IP address and have forgotten it, you might get the IP address of the VMG by looking up the IP address of the default gateway for your computer. To do this in most Windows computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the Default Gateway might be the IP address of the VMG (it depends on the network), so enter this IP address in your Internet browser. 3 If this does not work, you have to reset the device to its factory defaults. See Section 1.6 on page 19. I forgot the password. 1 See the cover page for the default login names and associated passwords. 2 If those do not work, you have to reset the device to its factory defaults. See Section 1.6 on page 19. I cannot see or access the Login screen in the web configurator. 1 Make sure you are using the correct IP address. • The default IP address is 192.168.1.1. • If you changed the IP address (Section 8.2 on page 115), use the new IP address. • If you changed the IP address and have forgotten it, see the troubleshooting suggestions for I forgot the IP address for the VMG. 2 Check the hardware connections, and make sure the LEDs are behaving as expected. See Section 1.5 on page 17. 3 Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java enabled. 4 If it is possible to log in from another interface, check the service control settings for HTTP and HTTPS (Maintenance > Remote MGMT). VMG3925-B10B User's Guide 254