ZyXEL VMG3925-B10B User Guide - Page 124
The STB Vendor ID Screen, The Wake on LAN Screen
View all ZyXEL VMG3925-B10B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Chapter 8 Home Networking 8.6 The STB Vendor ID Screen Set Top Box (STB) devices with dynamic IP addresses sometimes don't renew their IP addresses before the lease time expires. This could lead to IP address conflicts if the STB continues to use an IP address that gets assigned to another device. Use this screen to configure the Vendor IDs of connected STBs, which have the VMG automatically created static DHCP entries for them when they request IP addresses. Click Network Setting > Home Networking > STB Vendor ID to open this screen. Figure 54 Network Setting > Home Networking > STB Vendor ID The following table describes the labels in this screen. Table 34 Network Setting > Home Networking > STB Vendor ID LABEL DESCRIPTION Vendor ID 1~5 These are STB's Vendor Class Identifiers (DHCP option 60). A Vendor Class Identifier is usually used to inform the DHCP server a DHCP client's vendor and functionality. Apply Click Apply to save your changes. Cancel Click Cancel to exit this screen without saving. 8.7 The Wake on LAN Screen Use this screen to turn on a device on the LAN network. To use this feature, the remote device must also support Wake On LAN. You need to know the MAC address of the LAN device. It may be on a label on the device or in its documentation. Click Network Setting > Home Networking > Wake on Lan to open this screen. Figure 55 Network Setting > Home Networking > Wake on Lan VMG3925-B10B User's Guide 124