ZyXEL VMG3925-B10B User Guide - Page 143
Table 48, Label, Description
View all ZyXEL VMG3925-B10B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Chapter 10 Quality of Service (QoS) Table 48 Classification Setup: Add/Edit (continued) LABEL DESCRIPTION Step2: Criteria Configuration From Interface If you want to classify the traffic by an ingress interface, select an interface from the From Interface drop-down list box. Ether Type Select a predefined application to configure a class for the matched traffic. If you select IP, you also need to configure source or destination MAC address, IP address, DHCP options, DSCP value or the protocol type. Source Address Subnet Mask Port Range MAC MAC Mask If you select 802.1Q, you can configure an 802.1p priority level. Select the check box and enter the source IP address in dotted decimal notation. A blank source IP address means any source IP address. Enter the source subnet mask. If you select TCP or UDP in the IP Protocol field, select the check box and enter the port number(s) of the source. Select the check box and enter the source MAC address of the packet. Type the mask for the specified MAC address to determine which bits a packet's MAC address should match. Exclude Destination Address Subnet Mask Port Range MAC MAC Mask Enter "f" for each bit of the specified source MAC address that the traffic's MAC address should match. Enter "0" for the bit(s) of the matched traffic's MAC address, which can be of any hexadecimal character(s). For example, if you set the MAC address to 00:13:49:00:00:00 and the mask to ff:ff:ff:00:00:00, a packet with a MAC address of 00:13:49:12:34:56 matches this criteria. Select this option to exclude the packets that match the specified criteria from this classifier. Select the check box and enter the source IP address in dotted decimal notation. A blank source IP address means any source IP address. Enter the source subnet mask. If you select TCP or UDP in the IP Protocol field, select the check box and enter the port number(s) of the source. Select the check box and enter the source MAC address of the packet. Type the mask for the specified MAC address to determine which bits a packet's MAC address should match. Exclude Others Service Enter "f" for each bit of the specified source MAC address that the traffic's MAC address should match. Enter "0" for the bit(s) of the matched traffic's MAC address, which can be of any hexadecimal character(s). For example, if you set the MAC address to 00:13:49:00:00:00 and the mask to ff:ff:ff:00:00:00, a packet with a MAC address of 00:13:49:12:34:56 matches this criteria. Select this option to exclude the packets that match the specified criteria from this classifier. This field is available only when you select IP in the Ether Type field. Protocol This field simplifies classifier configuration by allowing you to select a predefined application. When you select a predefined application, you do not configure the rest of the filter fields. This field is available only when you select IP in the Ether Type field. Select this option and select the protocol (service type) from TCP, UDP, ICMP or IGMP. If you select User defined, enter the protocol (service type) number. VMG3925-B10B User's Guide 143