ZyXEL VMG3925-B10B User Guide - Page 258
USB Device Connection
View all ZyXEL VMG3925-B10B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 258 highlights
Chapter 40 Troubleshooting • Building Materials: metal doors, aluminum studs. • Electrical devices: microwaves, monitors, electric motors, cordless phones, and other wireless devices. To optimize the speed and quality of your wireless connection, you can: • Move your wireless device closer to the AP if the signal strength is low. • Reduce wireless interference that may be caused by other wireless networks or surrounding wireless electronics such as cordless phones. • Place the AP where there are minimum obstacles (such as walls and ceilings) between the AP and the wireless client. • Reduce the number of wireless clients connecting to the same AP simultaneously, or add additional APs if necessary. • Try closing some programs that use the Internet, especially peer-to-peer applications. If the wireless client is sending or receiving a lot of information, it may have too many programs open that use the Internet. What is a Server Set ID (SSID)? An SSID is a name that uniquely identifies a wireless network. The AP and all the clients within a wireless network must use the same SSID. 40.5 USB Device Connection The VMG fails to detect my USB device. 1 Disconnect the USB device. 2 Reboot the VMG. 3 If you are connecting a USB hard drive that comes with an external power supply, make sure it is connected to an appropriate power source that is on. 4 Re-connect your USB device to the VMG. 40.6 UPnP When using UPnP and the VMG reboots, my computer cannot detect UPnP and refresh My Network Places > Local Network. VMG3925-B10B User's Guide 258