ZyXEL VMG3925-B10B User Guide - Page 43
Table 4, Device / Computer, Ip Address
View all ZyXEL VMG3925-B10B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 4 Tutorials In the following figure, router R is connected to the VMG's LAN. R connects to two networks, N1 (192.168.1.x/24) and N2 (192.168.10.x/24). If you want to send traffic from computer A (in N1 network) to computer B (in N2 network), the traffic is sent to the VMG's WAN default gateway by default. In this case, B will never receive the traffic. N1 A R N2 B You need to specify a static routing rule on the VMG to specify R as the router in charge of forwarding traffic to N2. In this case, the VMG routes traffic from A to R and then R routes the traffic to B. N1 A R N2 B This tutorial uses the following example IP settings: Table 4 IP Settings in this Tutorial DEVICE / COMPUTER IP ADDRESS The VMG's WAN 172.16.1.1 The VMG's LAN 192.168.1.1 IP Type IPv4 Use Interface VDSL/ppp1.1 A 192.168.1.34 VMG3925-B10B User's Guide 43