ZyXEL VMG3925-B10B User Guide - Page 162
The Address Mapping Screen - port forwarding not working
View all ZyXEL VMG3925-B10B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Chapter 11 Network Address Translation (NAT) Figure 84 Network Setting > NAT > ALG The following table describes the fields in this screen. Table 62 Network Setting > NAT > ALG LABEL DESCRIPTION NAT ALG Enable this to make sure applications such as FTP and file transfer in IM applications work correctly with port-forwarding and address-mapping rules. SIP ALG Enable this to make sure SIP (VoIP) works correctly with port-forwarding and addressmapping rules. RTSP ALG Apply Enable this to have the VMG detect RTSP traffic and help build RTSP sessions through its NAT. The Real Time Streaming (media control) Protocol (RTSP) is a remote control for multimedia on the Internet. Click Apply to save your changes. Cancel Click Cancel to restore your previously saved settings. 11.7 The Address Mapping Screen Ordering your rules is important because the VMG applies the rules in the order that you specify. When a rule matches the current packet, the VMG takes the corresponding action and the remaining rules are ignored. Click Network Setting > NAT > Address Mapping to display the following screen. Figure 85 Network Setting > NAT > Address Mapping The following table describes the fields in this screen. Table 63 Network Setting > NAT > Address Mapping LABEL DESCRIPTION Add new rule Click this to create a new rule. Set This is the index number of the address mapping set. Local Start IP This is the starting Inside Local IP Address (ILA). Local End IP This is the ending Inside Local IP Address (ILA). If the rule is for all local IP addresses, then this field displays 0.0.0.0 as the Local Start IP address and 255.255.255.255 as the Local End IP address. This field is blank for One-to-One mapping types. Global Start IP This is the starting Inside Global IP Address (IGA). Enter 0.0.0.0 here if you have a dynamic IP address from your ISP. You can only do this for the Many-to-One mapping type. Global End IP This is the ending Inside Global IP Address (IGA). This field is blank for One-to-One and Many-to-One mapping types. VMG3925-B10B User's Guide 162