1995 Chevrolet Camaro Owner's Manual - Page 60
1995 Chevrolet Camaro Manual
Page 60 highlights
4 8 second transmitter is matched. This means that the second transmitter will not work until is matched it in step 5 . c I , c - w 1 4. Press any button on the first transmitter. The door locks should lock and unlock. 5. Press any button onthe second transmitter. The door locks should lock and unlock. 6. Remove the fused jumper from the DLC.The system will not work unless the jumper is removed. 7. Check that all the buttons on both transmitters work correctly. If the transmitters don't work,or if you'd rathernot match thetransmitters yourself, see your Chevrolet dealer. 2. Insert one end ofa fused jumper into terminal 8. Terminal 8 is the top terminal on the far right. ,_ ,> . 3. Insert the other end of the fused jumper into terminal 4. Terminal 4 is the fourth terminal from the left in the top row. You have grounded theprogram input line. You should hear thedoor locks lock and unlock within one to three seconds. When matching transmitters, the first transmitter code matched will be stored in both memories until a Battery Replacement Under normal use, thebatteries in your key chain transmitter should last about two years. You can tell the batteries are weak if the transmitter won't work at normal range in any location. If you the have to get close to your vehicle before the transmitter works, it's probably time to change the batteries. Use two batteries, type DL20 16, or a similar type.