2014 Ford Expedition Owner Manual Printing 1 - Page 117

116 Information Displays Compass calibration adjustment Note: For optimum calibration, drive to an open, level location away from large metallic objects or structures. Switch off all non-essential electrical accessories (heated rear window, heater, A/C, map lamps, wiper, etc.) and make sure all the doors are closed Note: If the RESET button is pressed or three minutes has expired, the display will go back to the INFO menu and will show CAL instead of the compass heading until the compass is calibrated. 1. Press RESET to start the compass calibration function. 2. Slowly drive the vehicle in a circle (less than 3 mph [5 km/h]) until the CIRCLE SLOWLY TO CALIBRATE display changes to CALIBRATION COMPLETED. It will take up to five circles to complete calibration. 3. The compass is now calibrated. • ENGLISH / FRENCH / SPANISH RESET FOR NEW: Allows you to choose which language the message center will display in. Press RESET to cycle through each of the language choices. Press and hold RESET for two seconds to set the language choice. INFORMATION MESSAGES Note: Depending on the vehicle options equipped with your vehicle, not all of the messages will display or be available. Certain messages may be abbreviated or shortened depending upon which cluster type you have. Press the RESET button for Type 1 displays or the OK button for Type 2 displays to acknowledge and remove some messages from the information display. Other messages will be removed automatically after a short time. Certain messages need to be confirmed before you can access the menus. AdvanceTrac® / Traction Control Messages SERVICE ADVANCETRAC Action / Description Displayed when the AdvanceTrac® system has detected a condition that requires service. Contact your authorized dealer as soon as possible. 2014 Expedition (exd) Owners Guide gf, 1st Printing, June 2013 USA (fus)