2014 Ford Expedition Owner Manual Printing 1 - Page 216

Load Carrying ROOF RACKS AND LOAD CARRIERS 215 WARNING: When loading the roof rail crossbars, it is recommended to evenly distribute the load, as well as maintain a low center of gravity. Loaded vehicles, with higher centers of gravity, may handle differently than unloaded vehicles. Extra precautions, such as slower speeds and increased stopping distance, should be taken when driving a heavily loaded vehicle. Note: The maximum recommended load is 200 pounds (90 kilograms), evenly distributed on the crossbars. Note: Loads should never be placed directly on the roof panel. The roof panel is not designed to directly carry a load. For proper function of the roof rack system, loads must be placed directly on crossbars affixed to the roof rack side rails. Your vehicle may be equipped with factory-installed crossbars. Ford Genuine Accessory crossbars, designed specifically for your vehicle, are also recommended for use with your roof rack system. Make sure that the load is securely fastened. Check the tightness of the load before driving and at each fuel stop. Adjusting the Crossbars (If Equipped) 1. Loosen the thumbwheels at both ends of the crossbar by turning them counterclockwise (both crossbars are adjustable). 2. Slide the crossbar to the desired location. 3. Tighten the thumbwheels at both ends of the crossbar by turning them clockwise. Make sure to check that the thumbwheels are tight each time a load is added or removed from the roof rack, and periodically while traveling. Make sure that the load is secure before traveling. 2014 Expedition (exd) Owners Guide gf, 1st Printing, June 2013 USA (fus)