2014 Ford Expedition Owner Manual Printing 1 - Page 77

76 Locks SECURICODE™ KEYLESS ENTRY KEYPAD You can use the keyless entry keypad to lock or unlock the doors or release the liftgate glass without using a key. The keypad can be operated with the factory-set 5-digit entry code; this code is located on the owner's wallet card in the glove box and is available from your authorized dealer. You can also create up to five of your own 5-digit personal entry codes. Programming a Personal Entry Code You can store up to three personal entry codes. To create your own personal entry code: 1. Enter the factory-set code. 2. Press the 1•2 on the keypad within five seconds. The doors will lock and then unlock to confirm that the system is in programming mode. 3. Enter your personal 5-digit code. You must enter each number within five seconds of each other. 4. Press 1•2 on the keypad to save personal entry code 1. The doors will lock and then unlock to confirm that programming is complete. To program additional personal entry codes, repeat Steps 1-3, then for Step 4: • press 3•4 to save personal entry code 2, or • press 5•6, 7•8, or 9•0 to save personal entry code 3. Tips: • Do not set a code that uses five of the same number. • Do not use five numbers in sequential order. • The factory-set code will work even if you have set your own personal code. Programming Memory to a Personal Entry Code To program a personal entry code to recall a driver memory setting, repeat Steps 1-4 above. • Pressing 1•2 on the keypad in Step 4 will program the code to driver memory setting 1. 2014 Expedition (exd) Owners Guide gf, 1st Printing, June 2013 USA (fus)