2014 Ford Expedition Owner Manual Printing 1 - Page 59

58 Keys and Remote Control Memory Feature (If Equipped) The feature allows the remote control to recall the driver seat, power mirrors and power adjustable foot pedals memory positions. Press the unlock button on the remote control to recall the memory positions. If the easy entry and exit feature is enabled, the seat will move to the easy entry position. The seat will move to the driver memory position when the key is put in the ignition. Programming Memory to the Remote Control 1. Switch on the ignition. 2. Move the memory features to the desired positions using the associated controls. 3. Press and hold button 1 on the side of the driver seat for five seconds. You will hear two tones. 2 1 4. Within three seconds press the lock button on the remote control. Repeat this procedure for memory button 2 and a second remote control if desired. Deactivating Memory from the Remote Control 1. Switch on the ignition. 2. Press and hold the desired memory button for five seconds. You will hear two tones. 3. Within three seconds press the unlock button on the remote control. Repeat this procedure for each additional remote control if desired. Car Finder Press the button twice within three seconds. The horn will sound and the turn signals will flash. We recommend you use this method to locate your vehicle, rather than using the panic alarm. Sounding a Panic Alarm Press the button to activate the alarm. Press the button again or switch the ignition on to deactivate. Note: The panic alarm will only operate when the ignition is off. 2014 Expedition (exd) Owners Guide gf, 1st Printing, June 2013 USA (fus)