2012 Jeep Grand Cherokee Owner Manual SRT - Page 173

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Setting Memory Positions And Linking Remote Keyless Entry Transmitter To Memory 5. Turn on the radio and set the radio station presets (up to 12 AM and 12 FM stations can be set). NOTE: Each time the S (SET) button and a numbered 6. Turn the ignition switch to the LOCK/OFF position button 1 or 2 are pressed, you erase the memory settings and remove the key. for that button and store a new one. 7. Press and release the S (SET) button located on the 1. Insert the ignition key, and turn the ignition switch to driver's door. the ON/RUN position. 8. Within five seconds, press and release MEMORY 2. Press the driver door MEMORY button number 1 if button 1 or 2 on the driver's door. The next step must be you are setting the memory for driver 1, or button performed within five seconds if you desire to also use a number 2 if you are setting the memory for driver 2. The RKE transmitter to recall memory positions. system will recall any stored settings. Wait for the system 9. Press and release the LOCK button on one of the RKE to complete the memory recall before continuing to transmitters. Step 3. 10. Insert the ignition key, and turn the ignition switch to 3. Adjust the driver's seat, recliner, and driver's sideview the ON/RUN position. mirror to the desired positions. 11. Select ЉRemote Linked to MemoryЉ in the Electronic 4. Adjust the power steering column tilt and telescoping Vehicle Information Center (EVIC) and enter ЉYesЉ. Refer position (if equipped) to the desired positions. 3