2012 Jeep Grand Cherokee Owner Manual SRT - Page 214

212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Do not attach or install any accessories near the sensor, Removing ACC Sensor For Off-Roading including transparent material or aftermarket grilles. NOTE: When off-roading, it may be advisable to reDoing so could cause an ACC system failure or move the ACC sensor. The sensor is located behind the malfunction. front lower grille in the center of the vehicle. After When the condition that deactivated the system is no removing the lower fascia, you may remove the lower longer present, the system will return to the "Adaptive sensor and bracket assembly. Cruise Control Off" state and will resume function by To remove the sensor follow these instructions: simply reactivating it. 1. Unplug the connector by depressing the two tabs on NOTE: the connector and pulling it out. Do not pull by the • If the "Clean Radar Sensor In Front Of Vehicle" wiring or use any tools to remove the connector. message occurs frequently (e.g. more than once on every trip) without any snow, rain, mud, or other 2. Remove the wiring christmas tree attachment from the obstruction, have the radar sensor realigned at your back of the bracket. authorized dealer. 3. Remove the two M6 fasteners that connect the bracket • Installing a snow plow, front-end protector, an after- to the bumper. market grille or modifying the grille is not recommended. Doing so may block the sensor and inhibit ACC operation.