2012 Jeep Grand Cherokee Owner Manual SRT - Page 320

318 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Press the DOWN button until the "Compass Variance" 1. Turn ON the ignition switch. message is displayed in the EVIC, then press the SELECT 2. Press the UP or DOWN button until the Setup button. The last variance zone number displays in the (Customer-Programmable Features) menu is reached, EVIC. then press the SELECT button. 4. Press and release the SELECT button until the proper 3. Press the DOWN button until "Calibrate Compass" is variance zone is selected, according to the map. displayed in the EVIC. 5. Press and release the BACK button to exit. 4. Press and release the SELECT button to start the calibration. The "CAL" indicator will be displayed in the Manual Compass Calibration If the compass appears erratic and the CAL indicator EVIC. does not appear in the EVIC display, you must put the 5. Complete one or more 360-degree turns (in an area compass into the Calibration Mode manually, as follows: free from large metal or metallic objects) until the "CAL" NOTE: For the most accurate compass performance, the indicator turns off. The compass will now function compass variance must be set before performing the normally. manual compass calibration. The variance should be set Customer-Programmable Features for the zone where the vehicle is driven, per the zone (System Setup) map. For further information, refer to "Compass VariPersonal Settings allows you to set and recall features ance." when the transmission is in PARK. If the transmission is