2012 Jeep Grand Cherokee Owner Manual SRT - Page 377

UNDERSTANDING YOUR INSTRUMENT PANEL 375 Controls • When both switches are on Channel 2, the Remote is The headphone power indicator and controls are located controlling Channel 2 and the headphones are tuned on the right ear cup. to the audio of the VES™ Channel 2. NOTE: The rear video system must be turned on before sound can be heard from the headphones. To conserve battery life, the headphones will automatically turn off approximately three minutes after the rear video system is turned off. Changing the Audio Mode for Headphones 2. Press the MODE button on the remote control. 3. If the video screen is displaying a video source (such as a DVD Video), pressing STATUS shows the status on a popup banner at the bottom of the screen. Pressing the MODE button will advance to the next mode. When the mode is in an audio only source (such as FM), the Mode Selection menu appears on screen. 4 1. Ensure the Remote Control channel/screen selector switch is in the same position as the headphone selector 4. When the Mode Selection menu appears on screen, switch.. use the cursor buttons on the remote control to navigate to the available modes and press the ENTER button to NOTE: select the new mode. • When both switches are on Channel 1, the Remote is controlling Channel 1 and the headphones are tuned 5. To cancel out of the Mode Selection menu, press the to the audio of the VES™ Channel 1. BACK button on the remote control.