2012 Jeep Grand Cherokee Owner Manual SRT - Page 174

172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE to "Electronic Vehicle Information Center (EVIC)/ To recall the memory setting for driver two, press Customer-Programmable Features" in "Understanding MEMORY button number 2 on the driver's door, or the UNLOCK button on the RKE transmitter linked to Your Instrument Panel" for further information. memory position 2. 12. Repeat the above steps to set the next memory position, using the other numbered memory button, or to A recall can be cancelled by pressing any of the MEMORY buttons on the drivers door during a recall (S, link another RKE transmitter to memory. 1, or 2). When a recall is cancelled, the driver's seat, Memory Position Recall driver's mirror and the pedals stop moving. A delay of NOTE: The vehicle must be in PARK to recall memory one second will occur before another recall can be positions. If a recall is attempted when the vehicle is not selected. in PARK, a message will be displayed in the Electronic To Disable A RKE Transmitter Linked To Memory Vehicle Information Center (EVIC). 1. Turn the ignition switch to the LOCK position, and To recall the memory settings for driver one, press remove the key. MEMORY button number 1 on the driver's door, or the UNLOCK button on the RKE transmitter linked to 2. Press and release MEMORY button number 1. The system will recall any memory settings stored in position memory position 1. 1. Wait for the system to complete the memory recall before continuing to Step 3.