2012 Jeep Grand Cherokee Owner Manual SRT - Page 309

UNDERSTANDING YOUR INSTRUMENT PANEL 307 Vehicles Not Equipped With Keyless Enter-N-Go • Distance To Empty (DTE) 1. Turn the ignition switch to the ON/RUN position (Do • Miles Per Gallon (MPG) not start the engine.) Press the UP/DOWN buttons to cycle through all the 2. Fully depress the accelerator pedal, slowly, three times Trip Computer functions. within 10 seconds. The Trip Functions mode displays the following informa3. Turn the ignition switch to the OFF/LOCK position. tion: NOTE: If the indicator message illuminates when you Average Fuel Economy / Fuel Saver Mode - If start the vehicle, the oil change indicator system did not Equipped Shows the average fuel economy since the last reset. reset. If necessary, repeat this procedure. When the fuel economy is reset, the display will read Fuel Economy "RESET" or show dashes for two seconds. Then, the Press and release the UP or DOWN button until "Fuel history information will be erased, and the averaging will Economy" displays highlighted in the EVIC and press continue from the last fuel average reading before the the SELECT button. Press and release the UP/DOWN reset. buttons until one of the following Fuel Economy functions displays in the EVIC: The FUEL SAVER MODE message will display above the average fuel economy in the EVIC display. This message • Average Fuel Economy/Fuel Saver Mode will appear whenever the Multi-Displacement System 4