2012 Jeep Grand Cherokee Owner Manual SRT - Page 21

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 audio and visual signals, the horn will sound, the headlights will turn on, park lamps and/or turn signals will flash repeatedly for three minutes. If the disturbance is still present (driver's door, passenger door, other doors, ignition) after three minutes, the headlights, park lamps and/or turn signals will flash for an additional 15 minutes. To Arm The System Follow these steps to arm the Vehicle Security Alarm: 1. Remove the key from the ignition system (refer to ЉStarting ProceduresЉ in ЉStarting And OperatingЉ for further information). • For vehicles equipped with Keyless Enter-N-Go, make sure the vehicle ignition system is ЉOFFЉ. 2 NOTE: The Panic and Security alarms are quite different. Please take a moment to activate the Panic and the • For vehicles not equipped with Keyless Enter-N-Go, Security modes to hear the differences in the horn. In case make sure the vehicle ignition system is ЉOFFЉ and the one should go off in the future, you will need to know key is physically removed from the ignition. which mode has been activated in order to deactivate it. 2. Perform one of the following methods to lock the Rearming The System vehicle: If something triggers the alarm, and no action is taken to • Press LOCK on the interior power door lock switch disarm it, the Vehicle Security Alarm will turn off the with the driver and/or passenger door open. horn after three minutes, turn off all of the visual signals after 15 minutes, and then the Vehicle Security Alarm will • Press the LOCK button on the exterior Passive Entry rearm itself. Door Handle with a valid Key Fob available in the same