2012 Jeep Grand Cherokee Owner Manual SRT - Page 221

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 WARNING! In the normal Cruise Control mode, the system will not react to vehicles ahead. In addition, the proximity warning does not activate and no alarm will sound even if you are too close to the vehicle ahead since neither the presence of the vehicle ahead nor the vehicle-to-vehicle distance is detected. Be sure to maintain a safe distance between your vehicle and the vehicle ahead. Always be aware which mode is selected. To Vary The Speed Setting There are two ways to change the set speed: • Use the accelerator pedal to adjust the vehicle to the desired speed and press the SET - button. • Tap the RES + or SET - button to increase or decrease the set speed in 1 mph (1.6 km/h) increments respectively. Hold the RES + or SET - button for 5 mph (8 km/h) increments. To Cancel The system will disable normal Cruise Control without erasing the memory if: 3 To Set A Desired Speed When the vehicle reaches the speed desired, press the • You softly tap or depress the brake pedal. SET - button and release. The EVIC will display the set • You press the CANCEL button. speed. • The Electronic Stability Control/Traction Control SysNOTE: You must observe the display when setting or tem (ESC/TCS) activates. changing speed, not the speedometer.