2012 Jeep Grand Cherokee Owner Manual SRT - Page 32

30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The engine can be started two consecutive times with the RKE transmitter. However, the ignition must be cycled by pushing the START/STOP button twice (or the ignition switch must be cycled to the ON/RUN position) before you can repeat the start sequence for a third cycle. To Exit Remote Start Mode Without Driving The Vehicle Press and release the REMOTE START button one time or allow the engine to run for the entire 15 minute cycle. NOTE: • For vehicles not equipped with the Keyless EnterNOTE: To avoid unintentional shutdowns, the system N-Go feature, the ignition switch must be in the will disable the one time press of the REMOTE START ON/RUN position in order to drive the vehicle. button for two seconds after receiving a valid Remote Start request. To Exit Remote Start Mode And Drive The Vehicle Before the end of 15 minute cycle, press and release the UNLOCK button on the RKE transmitter to unlock the doors and disarm the Vehicle Security Alarm (if equipped). Then, prior to the end of the 15 minute cycle, press and release the START/STOP button. If the START/STOP button is not present, insert the Key Fob into the ignition switch and turn the switch to the ON/RUN position.