2012 Jeep Grand Cherokee Owner Manual SRT - Page 506

504 WHAT TO DO IN EMERGENCIES 9. Lower the vehicle by turning the jack screw counterclockwise, and remove the jack and wheel blocks. 10. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for increased leverage. Tighten the lug nuts in a star pattern until each nut has been tightened twice. The correct wheel nut tightness is 110 ft lbs (150 N·m). If in doubt about the correct tightness, have them checked with a torque wrench by your authorized dealer or at a service station. 11. Lower the jack to the fully closed position and return it and the tools to the proper positions in the foam tray. 12. Remove the small center cap and securely store the 13. Have the aluminum road wheel and tire repaired as road wheel in the cargo area. soon as possible, properly secure the spare tire with the special wing nut torqued to 3.7 ft-lbs (5 N·m), reinstall the jack and tool kit foam tray, and latch the rear load floor cover. Stowed Spare