2012 Jeep Grand Cherokee Owner Manual SRT - Page 175

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 3. Press and release the memory S (SET) button located Easy Entry/Exit Seat This feature provides automatic driver's seat positioning on the driver's door. which will enhance driver mobility out of and into the 4. Within five seconds, press and release MEMORY vehicle. button 1 on the driver's door. There are two possible Easy Entry/Exit adjustments 5. Within five seconds, press and release the UNLOCK available: button on the RKE transmitter. • The seat cushion will move rearward approximately To disable another RKE transmitter linked to either 2.5 in (60 mm), if the starting position of the seat is memory position, repeat steps 1 through 5 for each RKE greater than or equal to 2.67 in (68 mm) forward of the transmitter. rear seat stop when the key is removed from the ignition switch. The seat will then move forward NOTE: Once programmed, all RKE transmitters linked approximately 2.5 in (60 mm) when the key is placed to memory can be easily enabled or disabled at one time. into the ignition and turned out of the LOCK position. Refer to "Electronic Vehicle Information Center (EVIC)/ Customer-Programmable Features" in "Understanding • The seat will move to the position located 0.3 in Your Instrument Panel" for further information. (8 mm) forward of the rear stop if the starting position is between 0.9 to 2.67 in (23 to 68 mm) forward of the rear stop when the key is removed from the ignition switch. The seat will move forward to the memory/ 3