2012 Jeep Grand Cherokee Owner Manual SRT - Page 58

56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically, checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system. Seat belt assemblies must be replaced after a collision if they have been damaged (bent retractor, torn webbing, etc.). 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to create a fold that begins immediately above the latch plate. 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the latch plate. 4. Continue to slide the latch plate up until it clears the folded webbing. Adjustable Upper Shoulder Belt Anchorage In the front seating positions, the shoulder belt can be Lap/Shoulder Belt Untwisting Procedure adjusted upward or downward to position the belt away Use the following procedure to untwist a twisted lap/ from your neck. Press the release button to release the shoulder belt. anchorage, and then move it up or down to the position 1. Position the latch plate as close as possible to the that fits you best. anchor point.