2010 Mazda RX-8 Owner's Manual - Page 107

RX-8_8AT5-EA-09E_Edition1 Page107 Wednesday, April 15 2009 10:33 AM Black plate (107,1) Knowing Your Mazda Doors and Locks NOTE l NOTE l l The two-step down function cannot be canceled if the procedure is not completed within the specified times, or the procedure is changed along the way. To redo the procedure, first turn the ignition switch to the LOCK position and proceed from the beginning. If you are unable to cancel the function despite carrying out the cancellation procedure, consult an Authorized Mazda Dealer. l Depending on driving conditions, a closing power window could stop and start opening when the window feels a shock that is similar to something blocking it. In the event the jam-safe function activates and the power window cannot be closed automatically, pull and hold the switch fully and the window will close. The jam-safe window function does not operate until the system is re-initialized. Engine-off power window operation The power window can be operated for about 40 seconds after the ignition switch is turned from the ON position to the ACC or LOCK position with all doors closed. If any door is opened, the power window will be inoperable. NOTE l Restoring the two-step down function With the two-step down function in the canceled state, repeat the previous procedure for canceling the function on each door switch and it will be restored. NOTE If you are unable to restore the function despite doing the restore procedure, consult an Authorized Mazda Dealer. Jam-safe window If a person's hands, head or an object blocks the window during the manual closing operation or the auto-closing operation, the window will stop and open halfway. l For engine-off operation of the power window, the switch must be held up firmly throughout window closure because the auto-closing function will be inoperable. The two-step down function is inoperable during engine-off operation. WARNING Make sure nothing blocks the window just before it reaches the fully closed position or while fully holding up the power window switch: Blocking the power window just before it reaches the fully closed position or while fully holding up the power window switch is dangerous. In this case, the jam-safe function cannot prevent the window from closing all the way. If fingers are caught, serious injuries could occur. 3-39 Form No.8AT5-EA-09E