2010 Mazda RX-8 Owner's Manual - Page 311
2010 Mazda RX-8 Manual
Page 311 highlights
RX-8_8AT5-EA-09E_Edition1 Page311 Wednesday, April 15 2009 10:34 AM Black plate (311,1) In Case of an Emergency Flat Tire NOTE Do not throw away the empty tire sealant bottle after use. Return the empty tire sealant bottle to an Authorized Mazda Dealer when replacing the tire. The empty tire sealant bottle will need to be used to extract and dispose of the used sealant from the tire. 14. Install the compressor hose to the tire valve. Valve Compressor hose 13. Attach the vehicle speed restriction sticker in a place where the driver can easily see it. 15. Insert the compressor plug into the interior accessory socket and turn the ignition switch to the ACC position (page 6-87). Compressor plug Compressor WARNING Do not attach the vehicle speed restriction sticker to the instrument panel, as it would obstruct vision of areas such as warning light indicators or the speedometer: Attaching the vehicle speed restriction sticker to the steering wheel pad is dangerous. The sticker could interfere with air bag inflation and cause serious injury. Center console CAUTION Ø Before pulling out the compressor plug from the electrical socket, make sure the compressor power switch is off. Ø The compressor turns on and off with the push-button switch. 16. Turn the compressor switch on and inflate the tire carefully to the correct inflation pressure. 7-9 Form No.8AT5-EA-09E