2010 Mazda RX-8 Owner's Manual - Page 21

RX-8_8AT5-EA-09E_Edition1 Page21 Wednesday, April 15 2009 10:32 AM Black plate (21,1) Essential Safety Equipment Seats Programmed seat positions can be activated using the following function: · Programming buttons 1, 2, or 3. Operation using the seat-side buttons Programming Park the vehicle in a safe location before performing the seat position programming. (Vehicle must be stopped) 1. Adjust the seat to the desired position. For each seat position adjustment method refer to the following pages: Seat Slide (page 2-7) Seat Recline (page 2-8) Height Adjustment (page 2-8) 2. Press the desired programming button 1, 2, or 3 while pressing the set button until a beep sound is heard. The button is programmed after a beep sound is heard. Other buttons can be programmed using the same procedure. NOTE Vehicle maintenance or other reasons requiring the vehicle battery to be disconnected will result in the seat position memory being erased. In this case, re-program the seat positions. qSeat Position Memory One-touch seat position programming and a activation function are available on the driver's seat. CAUTION When activating the seat position, do not place your hands or fingers around the seat bottom. The seat moves to the desired position automatically, and if your hands or fingers are placed around the seat bottom, it could cause injury. Set button Seat position activation While the vehicle is parked safely, press and hold a programming button 1, 2, or 3 for the desired seat position. When the seat is in the programmed position, a beep sound is heard. Programming of the driver's seat positions is possible using the following function: · Programming buttons 1, 2, or 3 and the set button. 2-9 Form No.8AT5-EA-09E