2010 Mazda RX-8 Owner's Manual - Page 366
2010 Mazda RX-8 Manual
Page 366 highlights
RX-8_8AT5-EA-09E_Edition1 Page366 Wednesday, April 15 2009 10:34 AM Black plate (366,1) Maintenance and Care Owner Maintenance Fuses Your vehicle's electrical system is protected by fuses. If any lights, accessories, or controls don't work, inspect the appropriate circuit protector. If a fuse has blown, the inside element will be melted. If the same fuse blows again, avoid using that system and consult an Authorized Mazda Dealer as soon as possible. 3. Install the new bulb in the reverse order of removal. Trunk light 1. Press both sides of the lens cap to remove it. 2. Disconnect the bulb by pulling it out. qFuse Replacement Replacing the fuses on the driver's side If the electrical system does not work, first inspect the fuses on the driver's side. 1. Turn off the ignition switch and other switches. 2. Open the fuse panel cover. 3. Install the new bulb in the reverse order of removal. 8-36 Form No.8AT5-EA-09E