2010 Mazda RX-8 Owner's Manual - Page 48

RX-8_8AT5-EA-09E_Edition1 Page48 Wednesday, April 15 2009 10:32 AM Black plate (48,1) Essential Safety Equipment Child Restraint qLATCH Child-Restraint System Installation Procedure (Rear Seats) 1. Expand the open seams on the rear of the seat bottom slightly to verify the locations of the LATCH lower anchors. Anchor bracket location Tether strap position Tether strap NOTE The markings above the LATCH lower anchors indicate the locations of LATCH lower anchors for the attachment of a child-restraint system. 2. Secure the child-restraint system using BOTH LATCH lower anchors, following the child-restraint system manufacturer's instruction. Pull on the child-restraint to be sure both anchors are engaged. 3. If your child-restraint system came equipped with a tether, that means it is very important to properly secure the tether for child safety. Please carefully follow the child-restraint system manufacturer's instructions when installing tethers. Anchor bracket 2-36 Form No.8AT5-EA-09E