2010 Mazda RX-8 Owner's Manual - Page 256

RX-8_8AT5-EA-09E_Edition1 Page256 Wednesday, April 15 2009 10:33 AM Black plate (256,1) Interior Comfort Audio System (Registered ID code input preparation) 2. Press and hold the auto memory button, then press channel preset button 6. Hold both buttons together for 1.5 seconds. 3. "ENTER PIN" appears for two seconds which indicates that it is in code input mode. 4. "SR1 - - - -" appears, which indicates that it is ready for code input. (Registered ID code input) 5. Input the registered ID code using channel preset buttons 1-4. Example: When the registered ID code is "2323", input "2323". At this time "SR1 2323" is displayed. NOTE If "Err" is displayed, go to the "INITIALIZATION OF ID CODE" section to reset the ID code to [0000]. NOTE l l If an ID code is not input for ten seconds, "Err" is displayed and it returns to the former display. Channel preset buttons 1, 2, 3, 4 and the auto memory button are used for input of the ID code. Buttons 5 and 6 cannot be used. (Registered ID code input determination) 6. Determine the input code by pressing the auto memory button. 7. If it does not match the registered code, "SR1 Err" is displayed and then it returns to "SR1 8. If it matches the registered code, "SR1 UNLOCK" appears for three seconds which indicates that the code input has been completed. 9. "SR1 100" appears which indicates that the parental lock is off. At this time, sound is heard. 6-42 Form No.8AT5-EA-09E