2010 Mazda RX-8 Owner's Manual - Page 344
2010 Mazda RX-8 Manual
Page 344 highlights
RX-8_8AT5-EA-09E_Edition1 Page344 Wednesday, April 15 2009 10:34 AM Black plate (344,1) Maintenance and Care Owner Maintenance NOTE l Each mark from the Full mark equates to about 0.5 L (0.5 US qt, 0.4 Imp qt). There are 3 marks between Low and Full. Full Engine Coolant qInspecting Coolant Level WARNING Do not use a match or live flame in the engine compartment. DO NOT ADD COOLANT WHEN THE ENGINE IS HOT: A hot engine is dangerous. If the engine has been running, parts of the engine compartment can become very hot. You could be burned. Carefully inspect the engine coolant in the coolant reservoir, but do not open it. Low 0.5 L (0.5 US qt, 0.4 Imp qt) 1.0 L (1.1 US qt, 0.9 Imp qt) 1.5 L (1.6 US qt, 1.3 Imp qt) 2.0 L (2.1 US qt, 1.8 Imp qt) l Verify that the engine cover is securely installed. Turn off the ignition switch and make sure the fan is not running before attempting to work near the cooling fan: Working near the cooling fan when it is running is dangerous. The fan could continue running indefinitely even if the engine has stopped and the engine compartment temperature is high. You could be hit by the fan and seriously injured. Do not remove the cooling system cap when the engine and radiator are hot: When the engine and radiator are hot, scalding coolant and steam may shoot out under pressure and cause serious injury. 8-14 Form No.8AT5-EA-09E