2015 Nissan Murano Owner's Manual - Page 118

DAYTIME RUNNING LIGHT SYSTEM The daytime running lights automatically illuminate when the engine is started with the parking brake released. The daytime running lights operate with the headlight switch in the OFF position position. Turn the headlight switch or in the to the position for full illumination when driving at night. If the parking brake is applied before the engine is started, the daytime running lights do not illuminate. The daytime running lights illuminate when the parking brake is released. The daytime running lights will remain on until the ignition switch is placed in the OFF position. LIC2237 SIC3269 Be sure you do not put anything on top of the autolight sensor located in the top side 1 of the instrument panel. The autolight ᭺ sensor controls the autolight; if it is covered, the autolight sensor reacts as if it is dark out and the headlights will illuminate. If this occurs while parked with the engine off and the ignition switch placed in the ON position, your vehicle's battery could become discharged. Headlight beam select 1 ᭺ To select the high beam function, push the lever forward. The high beam lights come on light illuminates. and the Pull the lever back to select the low beam. Pulling and releasing the lever flashes the headlight high beams on and off. WARNING When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others. 2 ᭺ 3 ᭺ Battery saver system The battery saver automatically turns off the ignition after a period of time when the ignition switch is left in the ACC (if so equipped) or ON position. Instruments and controls 2-31