2015 Nissan Murano Owner's Manual - Page 61

9. Check to make sure the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 2 through 8. LRS0865 LRS2597 1 ᭺ 2 ᭺ Forward-facing - step 10 10. If the child restraint is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag should illuminate. If this status light light is not illuminated refer to "Front passenger air bag and status light" in this section. Move the child restraint to another seating position. Have the system checked by a NISSAN dealer. After the child restraint is removed and the seat belt is fully retracted, the ALR mode (child restraint mode) is canceled. Rear row bench seat Top tether strap Anchor point Installing top tether strap The child restraint top tether strap must be used when installing the child restraint with seat belts. First, secure the child restraint with the seat belt. 1-42 Safety-Seats, seat belts and supplemental restraint system