2015 Nissan Murano Owner's Manual - Page 124

VEHICLE DYNAMIC CONTROL (VDC) OFF SWITCH 4. When the vehicle's interior is warmed or cooled, or before you leave the vehicle, be sure to turn the control knob to the Off B on (center) position. The indicator light ᭺ the control knob goes off with the switch in the off (center) position. To check the air filter for the climate controlled seat, contact a NISSAN dealer. ● Do not put anything on the seat which insulates heat, such as a blanket, cushion, seat cover, etc. Otherwise, the seat may become overheated. ● Do not place anything hard or heavy on the seat or pierce it with a pin or similar objects. This may result in damage to the climate controlled seat. ● Any liquid spilled on the seat should be removed immediately with a dry cloth ● The climate controlled seat has an air filter. Do not operate the climate controlled seat without an air filter. This may result in damage to the system. ● When cleaning the seat, never use gasoline, benzine, thinner, or any similar materials. ● If any malfunctions are found or the climate controlled seat does not operate, turn the switch off and have the system checked by your NISSAN dealer. WARNING Do not use or allow occupants to use the climate controlled seats if you or the occupants can not monitor seat temperatures or have an inability to feel pain in those body parts in contact with the seat. Use of the climate controlled seats by such people could result in serious injury. LIC1548 CAUTION ● The battery could run down if the climate control seat is operated while the engine is not running. ● Do not use the climate control seat for extended periods or when no one is using the seat. The vehicle should be driven with the VDC system on for most driving conditions. If the vehicle is stuck in mud or snow, the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine power is needed to free a stuck vehicle, turn the VDC system off. To turn off the VDC system, push the VDC OFF indicator will come on. switch. The Push the VDC OFF switch again or restart the engine to turn on the system. For additional information, refer to "Vehicle Dynamic Control (VDC) system" in the "Starting and driving" section of this manual. Instruments and controls 2-37