2015 Nissan Murano Owner's Manual - Page 272

How to enable/disable the RCTA system Perform the following steps to enable or disable the RCTA system. button until "Settings" dis1. Press the plays in the vehicle information display. Use button to select "Driver Assisthe tance". Then press the ENTER button. 2. Select "Blind Spot" and press the ENTER button. LSD2216 1 inThe RCTA system uses radar sensors ᭺ stalled on both sides near the rear bumper to detect an approaching vehicle. 1 detect an approaching The radar sensors ᭺ vehicle from up to approximately 66 ft. (20 m) away. 3. To set the BSW/RCTA system to on or off, buttons to navigate in the use the menu and use the ENTER button to select or change an item: ● Select "Blind Spot" and press the ENTER button. - To turn on the warning, use the ENTER button to check box for "BSW system" NOTE: The RCTA system is integrated into the BSW system. There is not a separate selection in the vehicle information display for the RCTA system. When the BSW is disabled, the RCTA system is also disabled. If the radar detects a vehicle approaching from the side, the system gives visual and audible warnings. Starting and driving 5-27