2015 Nissan Murano Owner's Manual - Page 179

5. If there is a desire to change to another Intelligent Key while in the vehicle, the user must turn the ignition OFF and initiate communication from the desired Intelligent Key. a. Ignition from ON position to the OFF b. Unlock door with the desired Intelligent Key c. The desired Intelligent Key number should appear on the meter display. The system contains a ON/OFF setting for when the settings are not to be memorized. The driver's seat and steering wheel will return to the previous position: ● When the ignition switch is turned to ACC or ON while the shift lever is in the P (Park) position. The entry/exit function can be adjusted or canceled through the Vehicle Settings in the vehicle information display by performing the following: ● Switch the Exit Seat Slide from ON to OFF. ● Switch the Exit Steering UP from ON to OFF. SETTING MEMORY FUNCTION The position of the following settings can be linked to the Intelligent Key and the memorized settings can be available for each Intelligent Key. ● Climate control system ● Navigation system (if so equipped) ● Audio system To use the memory function, set the climate, navigation and audio systems to the driver's preferred settings. Lock the doors with the Intelligent Key. Each Intelligent Key may be set with the driver's individual preferences. When a new Intelligent Key is used, "Connection with the key has been done" will be displayed on the screen and the memorized settings are available. To engage the memorized settings, perform the following: 1. Carry the Intelligent Key that is linked to the memorized settings. 2. Unlock the doors by pushing the driver or passenger door handle request switch or button on the Intelligent the UNLOCK Key. 3. Place the ignition switch in the "ON" position. The settings linked to the Intelligent Key will start. ENTRY/EXIT FUNCTION This system is designed so that the driver's seat and automatic operation steering column will automatically move when the shift lever is in the P (Park) position. This allows the driver to get into and out of the driver's seat more easily. The driver's seat will slide backward and the steering wheel will move up: ● When the driver's door is opened and the ignition switch is in the OFF position. ● When the ignition switch is turned from ACC to OFF with the driver's door open. Restarting the entry/exit function If the battery cable is disconnected or if the fuse opens, the stored memory positions may be lost and some of the functions will be restricted. 1. Drive the vehicle over 25 MPH (40 km/h). OR 1. Connect the battery cable or replace the fuse. 2. Open and close the driver's door more than 2 times with the ignition switch in the OFF position. The entry/exit function should now work properly. 3-36 Pre-driving checks and adjustments